Your shopping cart is currently empty.
Live Sound
-
Audio Technica ATW3211/831DE2 3000 Series Wireless Lavalier Microphone System-DE2 (470.125-529.275MHz)Features:
3000 Series Wireless Lavalier Microphone System-DE2 (470.125-529.275MHz)
Model: ATW3211/831DE2 Manufacturer: Audio Technica Special Order -
Audio Technica ATW3212/C510DE2 3000 Series Wireless Handheld Microphone System-DE2 (470.125-529.275MHz)Features:
3000 Series Wireless Handheld Microphone System-DE2 (470.125-529.275MHz)
Model: ATW3212/C510DE2 Manufacturer: Audio Technica Special Order -
Mackie 1604VLZ4 16CH Analog Mixer w/Onyx PreampsFeatures:
16-ch Analog Mixer with 16 Onyx Mic Preamps, 4 x Aux Sends Per Channel, 4 x Mix Buses, and 8 x Direct Outputs
Model: 1604VLZ4 Manufacturer: Mackie Special Order -
PEAVEY DM115120US Dark Matter 15" Powered PA SpkrFeatures:
Model: DM115120US Manufacturer: PEAVEY In stock -
PEAVEY RX22-22XTDIAKIT RX22-22XT Diaphragm KitFeatures:
RX22/22XT Diaphragm Kit
Model: RX22-22XTDIAKIT Manufacturer: PEAVEY Special Order -
QSC AD-S12BLK 12" Two-Way Surface Speaker, BlackFeatures:
The QSC AcousticDesign™ AD-S12 is a surface mounted low impedance, 12” twoway loudspeaker system, ideally suited for a wide variety of foreground and background sound reinforcement applications. AcousticDesign™ series offers integrators a premium quality installed sound solution where performance, coverage, and aesthetics are paramount. Combined with unprecedented ease-of-installation and high weather resistance, the AcousticDesign™ series provides integrators a versatile and confident install solution. The AD-S12 features a high quality 12" weather treated paper cone woofer on a 2.5" voice coil. A carefully selected 1” exit, 1.4" compression driver perfectly matches the sensitivity and performance of the woofer for outstanding full-range reproduction. SPECIFICATIONS System Details AD-S12 Effective frequency range1 52 – 20k Hz Rated noise power / voltage2 300 watts / 50 volts (rms) Broad-band sensitivity3 95 dB SPL Coverage angle (-6 dB) 75° Directivity factor (Q) 12 Directivity Index 11 dB Maximum continuous SPL4 120 dB Maximum peak SPL4 126 dB Rated impedance 8 ohms Recommended amplifier power 600 watts HF transducer 1” exit / 1.4” voice-coil compression driver LF transducer 12” weather resistant paper cone woofer, 2.5” / 64 mm voice-coil Input connector type Euroblock connector with parallel output Enclosure material Painted ABS polymer
Model: AD-S12BLK Manufacturer: QSC Limited Time 10% Coupon- price will be updated in shopping cart! Buy Now! Supplies are limited!Special Order -
Radial Engineer PRO48 Active Direct BoxFeatures:
The Pro48's innovative internal switching power supply significantly increases headroom producing less distortion while yielding a smooth, linear response that extends from 20Hz to well above 40kHz. This results in natural, uncolored signal that is as good or better than DI boxes costing several times more. The superior performance makes the Pro48 an ideal candidate for use with battery powered active basses and acoustic guitars that tend to overload other direct boxes.
Specifications Audio circuit type: Proprietary analog circuit with low-noise op-amp Frequency response: 20Hz ~ 20kHz (± 1.5 dB Dynamic range: 99dB Total harmonic distortion: 0.001% @ 0 dBu Intermodulation Distortion: 0.002% @ 0 dBu Phase Deviation: +28º at 20Hz | +1º at 1kHz | -2º at 20kHz Input Impedance: 220kΩ - ¼" input Output Impedance: 600Ω - XLR output Equivalent Input Noise: -86dBu Noise: -82dB below 0dBu Maximum Input: +9dBu Features Input pad, Ground lift General Construction: 14-gauge steel Size (L x W x D): 4.25" x 2.75" x 1.75" (108 x 70 x 44mm) Weight: 1.2 lb (0.54kg) Power: 48V phantom - proprietary digital switching Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable
Model: PRO48 Manufacturer: Radial Engineer In stock -
Radial Engineer PROAV1 Passive Multimedia Direct BoxFeatures:
The ProAV1 provides you with the ability to connect almost any audio source to a PA system, while automatically summing stereo sources to mono to preserve channels and simplify the audio setup. Inputs are available via 1/4", RCA, 3.5mm stereo, and line-level XLR connections, giving you the ability to easily connect to smartphones, tablets, laptops, CD players, or even a +4dB line level output from a console or recording interface. Transformer isolation helps eliminate noise while maintaining a linear frequency response, and a mono balanced XLR output allows you to feed a recording interface or a PA system.
Specifications Audio circuit type: Passive, transformer based Transformer: Eclipse ET-DB2, 12:1 ratio Number of channels: Single channel (mono) Frequency response: 20Hz ~ 18.5KHz (± 0.2dB) Dynamic range: 128dB Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB Phase Deviation: 1° @ 100Hz; 8° @ 20Hz Input Impedance: 140k Ohms, unbalanced Output Impedance: 150 Ohms, balanced Common Mode Rejection Ratio: 100dB @ 60Hz Maximum Input: +18dB @ 20Hz Features Input pad, Mono Sum, Ground lift Input Connectors: 1/4", RCA, 3.5mm TRS, XLR Output Connectors: XLR Extras: 1/4" thru, RCA thru General Construction: 14 gauge steel chassis & shell Size (L x W x D): 3.25” x 5” x 1.875” Weight: 0.73kg (1.6 lbs) Shipping size (L x W x D): 102 x 76 x 165mm (4.00" x 3.00" x 6.50") Shipping weight: 0.87 kg (1.92 lbs) Power: Passive, no power required Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable
Model: PROAV1 Manufacturer: Radial Engineer Special Order -
Radial Engineer PROAV2 Passive Multimedia Stereo Direct BoxFeatures:
The ProAV2 is an indispensable device for live sound engineers and audio-video technicians alike, with the ability to seamlessly interface nearly any device with a pro audio system. A 3.5mm stereo input jack and dual 1/4" and RCA connectors ensure that you won't ever be hunting around for adaptor cables, while ultra-quiet performance with transformer isolation helps eliminate hum and buzz from ground loops. The ProAV2 maintains stereo separation and exhibits linear frequency response from 20Hz to 20kHz, with balanced mic-level XLR outputs that allow you to send signals through a multichannel audio snake on stage or into two channels of a mixing console.
Specifications Audio circuit type: Passive, transformer based Transformer: Eclipse ET-DB2, 12:1 ratio Number of channels: Dual channel (stereo) Frequency response: 20Hz ~ 18.5KHz (± 0.2dB) Dynamic range: 128dB Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB Phase Deviation: 1° @ 100Hz; 8° @ 20Hz Input Impedance: 140k Ohms, unbalanced Output Impedance: 150 Ohms, balanced Maximum Input: +18dB @ 20Hz Features Ground lift Input Connectors: 1/4", RCA, 3.5mm TRS Output Connectors: XLR General Construction: 14-gauge steel chassis & shell Size (L x W x D): 3.25” x 5” x 1.875” Weight: 0.82kg / (1.8lbs) Shipping size (L x W x D): 102 x 76 x 165mm (4.00" x 3.00" x 6.50") Shipping weight: 1.2 kg (2.60 lbs) Power: Passive, no power required Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable
Model: PROAV2 Manufacturer: Radial Engineer Special Order -
Radial Engineer PROD2 Stereo Passive Direct BoxFeatures:
At the heart of the design are two high performance Eclipse ET-DB2 transformers. These deliver 20Hz to 20kHz performance with less than 1.5dB deviation above 18kHz and are able to withstand tremendous signal levels without distortion. Unlike active circuits that overload when the signal exceeds the rail voltage, transformers saturate. This creates a pleasing effect that naturally rounds out the tone, acting like a subtle limiter which is particularly advantageous when interfacing the ProD2 with digital pianos, samplers and drum machines that can produce excessive dynamics. Transformers are particularly adept at eliminating hum and buzz caused by ground loops.
Specifications Audio circuit type: Passive, transformer based Transformer: Eclipse ET-DB2, 12:1 ratio Number of channels: 2 Frequency response: 20Hz ~ 18.5KHz (± 0.2dB) Dynamic range: 128dB Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB Phase Deviation: 1° @ 100Hz; 8° @ 20Hz Input Impedance: 140k Ohms, unbalanced Output Impedance: 150 Ohms, balanced Maximum Input: +18dB @ 20Hz Features Input pad, 180° polarity reverse, Ground lift Input Connectors: 1/4" Output Connectors: XLR, 1/4" thru General Construction: 14 gauge steel chassis & outer shell Size (L x W x D): 5" x 3.3" x 1.8" (127mm x 84.1mm x 45.5mm) Weight: .54kg (1.2lbs) Shipping size (L x W x D): 6.5" x 4" x 3" (165mm x 102mm x 76mm) Shipping weight: 0.61 kg (1.35 lbs) Power: Passive, no power required Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable
Model: PROD2 Manufacturer: Radial Engineer Special Order -
Radial Engineer PRODI Passive Direct BoxFeatures:
The heart of the ProDI is a custom wound Radial transformer. It features an exceptionally high 140kΩ input impedance to reduce loading while enabling the ProDI to handle extreme signal levels at all frequencies without distortion. This is further improved upon with an internal MuMETAL® shield to protect against electromagnetic fields that can cause unshielded transformers to distort.
Specifications Audio circuit type: Passive, transformer based Transformer: Eclipse ET-DB2, 12:1 ratio Number of channels: Single channel (mono) Frequency response: 20Hz ~ 18.5KHz (± 0.2dB) Dynamic range: 128dB Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB Phase Deviation: 1° @ 100Hz; 8° @ 20Hz Input Impedance: 140k Ohms, unbalanced Output Impedance: 150 Ohms, balanced Maximum Input: +18dB @ 20Hz Features Input pad, Ground lift Input Connectors: 1/4" in & thru Output Connectors: XLR-M out General Construction: 14 gauge steel chassis & outer shell Size (L x W x D): 4.25” x 2.75” x 1.75" (108 x 70 x 44mm) Weight: 1.2lb (0.54kg) Shipping size (L x W x D): 6.5" x 4" x 3" (165 x 76 x 102mm) Shipping weight: 1.35lb (0.61kg) Power: Passive, no power required Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable
Model: PRODI Manufacturer: Radial Engineer Special Order -
RCF EVOX8 Active Portable PA SystemFeatures:
Evox 8 is a portable compact size sound reinforcement system. Evox 8 combines the quality and reliability of RCF transducers with a very high amplification power. The system features eight 2.0” full range transducers in the line source satellite and a deep sounding 12” woofer in a bass reflex enclosure. The system is designed to be the perfect high output solution for live music and DJs. The unique vocal attitude and SPL make Evox 8 the perfect tool for larger presentations, corporate events and congresses.
Model: EVOX8 Manufacturer: RCF In stock -
RCF EVOXJMIX8 Active Portable PA with 8 Input Bluetooth MixerFeatures:
Taking the EVOX J Series one step further, RCF has added an 8-input Digital Mixer to the system. The onboard processing power of the innovative Z.CORE DSP provides not only full mix functions; it includes high-quality instrument FX and AMP simulations. An EVOX iOS/Android-compatible app allows to manage the JMIX8. Adding Bluetooth audio and Hi-Z instrument input,the EVOX JMIX8 combines the quality and reliability of RCF transducers and amplification with a powerful remote controllable 8-channel digital mixer
Model: EVOXJMIX8 Manufacturer: RCF In stock -
RCF HDL6 1400W 2-Way Line Array ModuleFeatures:
The black HDL 6-A Active Line Array Module from RCF is a 2-way active line array module designed for live sound reinforcement and installed sound applications. Powered by a 1400W 2-channel class-D amplifier, it features two 6" neodymium woofers for a solid bass reproduction and a 1.7" voice coil compression driver mounted on a precise 100 x 10° waveguide. The powerful DSP processes the sound including crossover, phase correction, limiting, and protection. The system accept female XLR input connectors and line-level signals from a mixing console or other signal source. The output XLR male connector provides a loop-trough for speaker's daisy chaining. The volume knob controls the volume of the power amplifier. The control ranges from maximum attenuation to the maximum level (maximum output).
Model: HDL6 Manufacturer: RCF Special OrderCall to order - xxx-xxx-xxxx -
Sennheiser EW100G4ME3A Wireless Headworn Mic SystemFeatures:
Model: EW100G4ME3A Manufacturer: Sennheiser Special Order -
Sennheiser EW100G4ME3A1 Wireless Headworn Mic SystemFeatures:
Model: EW100G4ME3A1 Manufacturer: Sennheiser Special Order -
Sennheiser SK100G4A Wireless Body Pack Transmitter -A RangeFeatures:
Robust bodypack transmitter for daily use with evolution wireless G4 100 G4 systems.
Model: SK100G4A Manufacturer: Sennheiser Special Order -
Sennheiser SK100G4A1 Wireless Body Pack Transmitter-A1 RangeFeatures:
Robust bodypack transmitter for daily use with evolution wireless G4 100 G4 systems.
Model: SK100G4A1 Manufacturer: Sennheiser Special Order -
Shure SE215-CL Sound Isolating Earphones with Dynamic MicroDriver andDetachable Cable (Clear)Features:
Model: SE215-CL Manufacturer: Shure Special Order -
Shure SE215-K Sound Isolating Earphones with Dynamic MicroDriver and Detachable Cable (Black)Features:
Model: SE215-K Manufacturer: Shure In stock