Live Sound Accessories
-
Audio Technica ATHE40 Professional In-Ear Monitor HeadphonesFeatures:
Professional In-Ear Monitor Headphones
Model: ATHE40 Manufacturer: Audio Technica Special Order -
Radial Engineer PRO48 Active Direct BoxFeatures:
The Pro48's innovative internal switching power supply significantly increases headroom producing less distortion while yielding a smooth, linear response that extends from 20Hz to well above 40kHz. This results in natural, uncolored signal that is as good or better than DI boxes costing several times more. The superior performance makes the Pro48 an ideal candidate for use with battery powered active basses and acoustic guitars that tend to overload other direct boxes.
Specifications Audio circuit type: Proprietary analog circuit with low-noise op-amp Frequency response: 20Hz ~ 20kHz (± 1.5 dB Dynamic range: 99dB Total harmonic distortion: 0.001% @ 0 dBu Intermodulation Distortion: 0.002% @ 0 dBu Phase Deviation: +28º at 20Hz | +1º at 1kHz | -2º at 20kHz Input Impedance: 220kΩ - ¼" input Output Impedance: 600Ω - XLR output Equivalent Input Noise: -86dBu Noise: -82dB below 0dBu Maximum Input: +9dBu Features Input pad, Ground lift General Construction: 14-gauge steel Size (L x W x D): 4.25" x 2.75" x 1.75" (108 x 70 x 44mm) Weight: 1.2 lb (0.54kg) Power: 48V phantom - proprietary digital switching Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable
Model: PRO48 Manufacturer: Radial Engineer In stock -
Radial Engineer PROAV1 Passive Multimedia Direct BoxFeatures:
The ProAV1 provides you with the ability to connect almost any audio source to a PA system, while automatically summing stereo sources to mono to preserve channels and simplify the audio setup. Inputs are available via 1/4", RCA, 3.5mm stereo, and line-level XLR connections, giving you the ability to easily connect to smartphones, tablets, laptops, CD players, or even a +4dB line level output from a console or recording interface. Transformer isolation helps eliminate noise while maintaining a linear frequency response, and a mono balanced XLR output allows you to feed a recording interface or a PA system.
Specifications Audio circuit type: Passive, transformer based Transformer: Eclipse ET-DB2, 12:1 ratio Number of channels: Single channel (mono) Frequency response: 20Hz ~ 18.5KHz (± 0.2dB) Dynamic range: 128dB Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB Phase Deviation: 1° @ 100Hz; 8° @ 20Hz Input Impedance: 140k Ohms, unbalanced Output Impedance: 150 Ohms, balanced Common Mode Rejection Ratio: 100dB @ 60Hz Maximum Input: +18dB @ 20Hz Features Input pad, Mono Sum, Ground lift Input Connectors: 1/4", RCA, 3.5mm TRS, XLR Output Connectors: XLR Extras: 1/4" thru, RCA thru General Construction: 14 gauge steel chassis & shell Size (L x W x D): 3.25” x 5” x 1.875” Weight: 0.73kg (1.6 lbs) Shipping size (L x W x D): 102 x 76 x 165mm (4.00" x 3.00" x 6.50") Shipping weight: 0.87 kg (1.92 lbs) Power: Passive, no power required Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable
Model: PROAV1 Manufacturer: Radial Engineer Special Order -
Radial Engineer PROAV2 Passive Multimedia Stereo Direct BoxFeatures:
The ProAV2 is an indispensable device for live sound engineers and audio-video technicians alike, with the ability to seamlessly interface nearly any device with a pro audio system. A 3.5mm stereo input jack and dual 1/4" and RCA connectors ensure that you won't ever be hunting around for adaptor cables, while ultra-quiet performance with transformer isolation helps eliminate hum and buzz from ground loops. The ProAV2 maintains stereo separation and exhibits linear frequency response from 20Hz to 20kHz, with balanced mic-level XLR outputs that allow you to send signals through a multichannel audio snake on stage or into two channels of a mixing console.
Specifications Audio circuit type: Passive, transformer based Transformer: Eclipse ET-DB2, 12:1 ratio Number of channels: Dual channel (stereo) Frequency response: 20Hz ~ 18.5KHz (± 0.2dB) Dynamic range: 128dB Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB Phase Deviation: 1° @ 100Hz; 8° @ 20Hz Input Impedance: 140k Ohms, unbalanced Output Impedance: 150 Ohms, balanced Maximum Input: +18dB @ 20Hz Features Ground lift Input Connectors: 1/4", RCA, 3.5mm TRS Output Connectors: XLR General Construction: 14-gauge steel chassis & shell Size (L x W x D): 3.25” x 5” x 1.875” Weight: 0.82kg / (1.8lbs) Shipping size (L x W x D): 102 x 76 x 165mm (4.00" x 3.00" x 6.50") Shipping weight: 1.2 kg (2.60 lbs) Power: Passive, no power required Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable
Model: PROAV2 Manufacturer: Radial Engineer Special Order -
Radial Engineer PROD2 Stereo Passive Direct BoxFeatures:
At the heart of the design are two high performance Eclipse ET-DB2 transformers. These deliver 20Hz to 20kHz performance with less than 1.5dB deviation above 18kHz and are able to withstand tremendous signal levels without distortion. Unlike active circuits that overload when the signal exceeds the rail voltage, transformers saturate. This creates a pleasing effect that naturally rounds out the tone, acting like a subtle limiter which is particularly advantageous when interfacing the ProD2 with digital pianos, samplers and drum machines that can produce excessive dynamics. Transformers are particularly adept at eliminating hum and buzz caused by ground loops.
Specifications Audio circuit type: Passive, transformer based Transformer: Eclipse ET-DB2, 12:1 ratio Number of channels: 2 Frequency response: 20Hz ~ 18.5KHz (± 0.2dB) Dynamic range: 128dB Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB Phase Deviation: 1° @ 100Hz; 8° @ 20Hz Input Impedance: 140k Ohms, unbalanced Output Impedance: 150 Ohms, balanced Maximum Input: +18dB @ 20Hz Features Input pad, 180° polarity reverse, Ground lift Input Connectors: 1/4" Output Connectors: XLR, 1/4" thru General Construction: 14 gauge steel chassis & outer shell Size (L x W x D): 5" x 3.3" x 1.8" (127mm x 84.1mm x 45.5mm) Weight: .54kg (1.2lbs) Shipping size (L x W x D): 6.5" x 4" x 3" (165mm x 102mm x 76mm) Shipping weight: 0.61 kg (1.35 lbs) Power: Passive, no power required Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable
Model: PROD2 Manufacturer: Radial Engineer Special Order -
Radial Engineer PRODI Passive Direct BoxFeatures:
The heart of the ProDI is a custom wound Radial transformer. It features an exceptionally high 140kΩ input impedance to reduce loading while enabling the ProDI to handle extreme signal levels at all frequencies without distortion. This is further improved upon with an internal MuMETAL® shield to protect against electromagnetic fields that can cause unshielded transformers to distort.
Specifications Audio circuit type: Passive, transformer based Transformer: Eclipse ET-DB2, 12:1 ratio Number of channels: Single channel (mono) Frequency response: 20Hz ~ 18.5KHz (± 0.2dB) Dynamic range: 128dB Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB Phase Deviation: 1° @ 100Hz; 8° @ 20Hz Input Impedance: 140k Ohms, unbalanced Output Impedance: 150 Ohms, balanced Maximum Input: +18dB @ 20Hz Features Input pad, Ground lift Input Connectors: 1/4" in & thru Output Connectors: XLR-M out General Construction: 14 gauge steel chassis & outer shell Size (L x W x D): 4.25” x 2.75” x 1.75" (108 x 70 x 44mm) Weight: 1.2lb (0.54kg) Shipping size (L x W x D): 6.5" x 4" x 3" (165 x 76 x 102mm) Shipping weight: 1.35lb (0.61kg) Power: Passive, no power required Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable
Model: PRODI Manufacturer: Radial Engineer Special Order